Isobornyl methacrylate CAS#: 7534-94-3; 凯望编码 (ChemWhat Code): 57515
Identification
| 英文名 | Isobornyl methacrylate |
| IUPAC Name | [(1R,2R,4R)-1,7,7-trimethyl-2-bicyclo[2.2.1]heptanyl] 2-methylprop-2-enoate |
| 分子结构 |  |
| CAS编号 | 7534-94-3 |
| EINECS Number | 231-403-1 |
| MDL Number | MFCD00081070 |
| 别名 | (1R,2R,4R)-1,7,7-trimethylbicyclo[2.2.1]hept-2-yl 2-methylprop-2-enoate;(1R,2R,4S)-1,7,7-Trimethylbicyclo[2.2.1]hept-2-ylmethacrylat; IBMA |
| 分子式 | C14H22O2 |
| 分子量 | 222.32 |
| InChI | InChI=1S/C14H22O2/c1-9(2)12(15)16-11-8-10-6-7-14(11,5)13(10,3)4/h10-11H,1,6-8H2,2-5H3/t10-,11+,14-/m0/s1 |
| InChI Key | IAXXETNIOYFMLW-GYSYKLTISA-N |
| Canonical SMILES | CC(=C)C(=O)OC1CC2CCC1(C2(C)C)C |
| Isomeric SMILES | CC(=C)C(=O)O[C@@H]1C[C@H]2CC[C@@]1(C2(C)C)C |
| Patent Information | ||
| Patent ID | Title | Publication Date |
| US5154920 | Disinfectant polymeric coatings for hard surfaces | 1992 |
| EP194770 | Disinfectant polymeric coatings for hard surfaces | 1991 |
Physical Data
| Appearance | Colorless transparent clear liquid |
| Water Solubility | Slightly soluble(1.87e-02 g/L) |
| Melting Point | -60 °C |
| Boiling Point | 127-129 °C15 mm Hg(lit.) |
| Flash Point | 225 °F |
| Refractive index | n20/D 1.477(lit.) |
| Water Solubility | negligible |
| Density | 0.983 g/mL at 25 °C(lit.) |
Spectra
| Description (NMR Spectroscopy) | Nucleus (NMR Spectroscopy) | Solvents (NMR Spectroscopy) | Frequency (NMR Spectroscopy), MHz |
| Chemical shifts | 1H | chloroform-d1 | 400 |
| Chemical shifts | 13C | chloroform-d1 | 400 |
| Description (IR Spectroscopy) | Solvent (IR Spectroscopy) |
| Bands | neat liquid |
| Isobornyl methacrylate CAS 7534-94-3 IR |  |
| Isobornyl methacrylate CAS 7534-94-3 Raman |  |
| Description (Mass Spectroscopy) | Solvent (UV/VIS Spectroscopy) | Comment (UV/VIS Spectroscopy) |
| fast atom bombardment (FAB), high resolution mass spectrometry (HRMS), spectrum |
Route of Synthesis (ROS)
| Conditions | Yield |
| With acetic acid In methanol; cyclohexane Experimental Procedure Comparative Example 1 Isobornyl Methacrylate without Lithium Bromide A 3-L 4-necked round-bottomed flask equipped with a mechanical stirrer, air sparge (10-15 mL/min), thermocouple, 12-inch column (packed with 0.20 inch Propak packing, approximately 6 plates), and variable reflux head is charged with 588 g (3 moles) of isobornyl acetate, cyclohexane (300 g), and methyl methacrylate (450 g, 4.5 moles). The reaction mixture is brought to reflux and about 10 mL of cyclohexane/H2 O is distilled out over approximately 15 minutes. A solution of 10percent lithium t-butoxide in cyclohexane (40 g, 0.05 moles) is added and the reaction placed under total reflux until the head temperature drops to 57° C. The cyclohexane/methyl acetate azeotrope is removed at a reflux ratio of 9:1. The head temperature remains at 57° C. for the first two-thirds of the reaction and then slowly rises to 70° C. at the conclusion while the pot temperature rises to about 105-110° C. The reaction is continued until the ratio of isobornyl methacrylate to isobornyl acetate exceeds 100. Once the reaction is complete, the batch is cooled to 80° C. and acetic acid (5.4 g, 0.09 moles) is added. The remaining cyclohexane and methyl methacrylate are removed via vacuum distillation (70-80° C.). When the crude product is dissolved in (2/98 vol/vol) in methanol, a cloudy white precipitate forms. The crude product is diluted with an equal weight of cyclohexane and washed with 20percent by weight of 20percent caustic. The two phases do not separate on prolonged standing. This result as well as the large quantity of precipitate produced on dissolving the crude reaction mixture in methanol indicate the presence of polymer in the reaction mixture. |
Safety and Hazards
| Pictogram(s) |   |
| Signal | Warning |
| GHS Hazard Statements | H315: Causes skin irritation [Warning Skin corrosion/irritation] H319: Causes serious eye irritation [Warning Serious eye damage/eye irritation] H335: May cause respiratory irritation [Warning Specific target organ toxicity, single exposure; Respiratory tract irritation] H411: Toxic to aquatic life with long lasting effects [Hazardous to the aquatic environment, long-term hazard] H412: Harmful to aquatic life with long lasting effects [Hazardous to the aquatic environment, long-term hazard] Information may vary between notifications depending on impurities, additives, and other factors. |
| Precautionary Statement Codes | P261, P264, P271, P273, P280, P302+P352, P304+P340, P305+P351+P338, P312, P321, P332+P313, P337+P313, P362, P391, P403+P233, P405, and P501 (The corresponding statement to each P-code can be found at the GHS Classification page.) |
Other Data
| Transportation | Not dangerous goods |
| Under the room temperature and away from light | |
| HS Code | 294200 |
| Storage | Under the room temperature and away from light |
| Shelf Life | 2 years |
| Market Price |
| Use Pattern |
| IBOMA is a special monomer with many func-tions. |
| IBOMA can effectively reduce the viscosity of polymer solution |
| IBOMA is more effective to reduce the viscosity of polymer solutions. |
| Acrylic resin added IBOMA is soluble in polyester, alkyd and film-forming materials of many volatile paints. |
试剂采购 | |
| 没有试剂厂商? | 向凯望发送快速询价 |
| 想要被列为试剂厂商? (付费服务) | 点击这里联系凯望 |
认证生产商 | |
| Warshel Chemical Ltd | http://www.warshel.com/ |
| 想要被列为认证生产商 (需要通过认证)? | 请下载并填写 这份表格并发邮件到approved-manufacturers@chemwhat.com |
其他供应商 | |
| Watson International Limited | 访问Watson官网 |
如需其他帮助，请联系我们 | |
| 联系我们获取其它信息或服务 | 点击这里联系凯望 |